Partial Introduction
Photoelectric tracking system
Edge posltion controller system
Fast sheet cutter
Main Technical Parameter
| Model | CM-1100/1500/1700/1900A |
| Model of cutting paper | The up knife cut reciprocally and the down knife is fixed |
| Thickness of cutting paper | 60-550g |
| Max. scroll diameter | 1800mm |
| Max. paper cutting width | 1100mm/1500mm/1700mm/1900mm |
| Cutting length range | 450-1600mm |
| The format of slitting | 2 sheet |
| Cutting precision | Cutting length≤1000mm: +/-0.5mm; Cutting length>1000mm: +/-0.1% |
| Max. cutting speed | 300cuts/min |
| Max. cutting meter speed | 300m/min |
| Max. paper piling height | 1500mm |
| The request for air compressor | 0.8Mpa |
| Power consumption | 380V/220V×50Hz |
| Gross weight | 9000kgs/11000kgs/13000kgs/15000kgs |
| Full-load Power | 22/26/30/35kw |
| High-precision single knife cutting machine | 1SET |
| Paper prismatic automatic adjustment system | 1SET |
| Paper transporting equipment | 1SET |
| Middle slitting and waste collection system | 1SET |
| Electrical controlling system | 1SET |
| Driving motor system | 1SET |
| Accessory by machine | 1SET |
| Operation system:LCD panel by operator | 1SET |
| Main drive system:AC servo motor | 1SET |
Our company reserves the right to change technical parameter without futher notice.
Drawing
